WAS 300 Emergency Ambulance Emergency Ambulance Ford Transit Panel Van 4.3 T

The WAS 300 ambulance sets new standards regarding ergonomics, hygiene, patient handling and data connectivity. This vehicle is equipped with latest state of the art CAN-bus communication technology that covers RFID, Telemetry and green features like an Eco-Run engine control system that reduces idling hours of the base vehicle engine. Continuous mobile data connectivity is guaranteed by standalone data transfer systems like 4G and KymetaTM satellite systems. By having a Ford Transit chassis, with a powerful petrol engine and a GVW of 4300 kg, this compact ambulance defines the future for both, paramedics and patients, in the present.

Here is the data sheet available to download.

Driver´s compartment

  • Center console between driver’s and co-driver’s seat
  • Central operation touch panel for all necessary functions
  • Additional control panels above the dashboard
  • Display of distance control systems
  • Rear view screen when operating the reverse gear

Base vehicle

Model Ford Transit
Type L3H3, 6 cylinder
Engine Petrol
Gearbox Automatic transmission
Wheel base 3749 mm
Maximum
total weight    		 4300 kg

Exterior

  • LED flashers as body flashers, intersection flashers, penetration flashers as well as in the front light bar for 360° high visibility
  • Electronic siren installed below the engine, at the front of the vehicle
  • AC system: independent AC system for the driver’s cab and for the patient compartment with independent compressors, solar fan functioning when the solar exposure hits the outside fan surface and the AC is off

Interior

  • WAS electro hydraulic table with WAS Multi-Load system:
    - Trendelenburg and anti-Trendelenburg position
    - Adjustable in height
    - Suspension mode
    - CPR mode
    - Lateral movement for an efficient use of space and an optimum patient treatment
    - Move-in assistance for a smooth and back-friendly loading of the patient
  • IV holder hooks integrated in the ceiling
  • Computerised vehicle management based on CAN-bus technology
  • Central touch panel for the control of the electrohydraulic table, AC system, lighting, fan operation and RFID operation

Left side wall

  • Three-part overhead compartment
  • Space for medical equipment
  • Low level storage compartment below the medical equipment
  • Rear compartment to store two oxygen cylinders with an automatic change over system
  • All items are fixed vibration-free
  • Oxygen and power (12 V and 230 V) outlets
  • Long grab rail

Partition wall

  • Compartment for emergency bags with access from the outside and the inside
  • Storage space integrated into the bulkhead for a Combi Carrier spine board
  • Foldable doctor’s seat with storage space underneath
  • High-quality stainless-steel working surface on all compartments
  • 7 l compressor refrigerator
  • Slide-out tray for small material
  • Drugs compartment, lockable, and small overhead compartment

Right side wall

  • 1 rotating foldable seat with three-point belt, 1 folding attendant’s seat with three-point seatbelt
  • Central control touch panel
  • Intercom system with the driver
  • Oxygen and power (12 V and 230 V) outlets
  • Long grab rail
  • Life hammer adjacent to each window for emergency exit

Special features

  • Electro-hydraulic ambulance table with WAS Multi-Load Assist system
  • The complete vehicle conversion is made of organic-free materials: no defects in the material, no germ formation
  • With its special material and 2 independent heavy-duty air-conditioning units, the vehicle is perfectly adapted to hot countries
  • Continuous mobile data connectivity is guaranteed by standalone data transfer systems like 4G and KymetaTM satellite systems
  • Warning FM radio system for surrounding traffic while an ambulance is approaching
to top