WAS 500 Baby Mobile Intensive Care Unit B-MICU Mercedes-Benz Sprinter Box Body 4.2 T

Transportation of newborn and premature babies is particularly sensitive and requires appropriate vehicle features. The WAS Baby-MICU is perfectly designed for these demanding operations. The incubator is loaded easily and directly through the side sliding door and is installed perpendicular to the direction of travel to any avoid negative effects from longitudinal acceleration. This guarantees the smoothest possible transportation. Thanks to the two attendant seats with integrated three-point seatbelts, the companions are seated safely and the infant can be given optimum care. 

Here is the data sheet available to download.

Box body

ModelBaby-MICU
Internal dimensionsLength 2590 mm
Width 2080 mm
Height 2050 mm
DoorsSide sliding door, front right
Rear double-wing door
MiscellaneousLow loading height thanks to drop-centre frame
High torsional strength due to reinforced attachment of the box

Exterior

  • Reversing camera with shutter
  • LED external lighting
  • LED external floodlights
  • LED warning system in WAS New Design
  • Sputnik nano LED front flasher

Furniture

  • Large storage cupboards on the left and right side walls
  • Storage cupboard for 2 x 11 litres of oxygen, left
  • Storage cupboard with variable bracket for 2 spare bottles
  • Storage cupboard for 2 x 11 litres of medical compressed air, right
  • Hanging locker on the partition wall with underfloor panel
  • Fridge and thermobox in the free-standing central cupboard
  • Centre console between driver's seat and co-driver's seat
  • Compressor fridge

Interior

  • Ambulance table installed transversely  at the front
  • Electric pressure-relief valve for the oxygen and compressed-air supply
  • 2 attendant seats with integrated three-point seatbelts
  • LED internal lighting with emergency light and blue nightlight/calm light
  • 7.5 kW heat exchanger, regulated via thermostat
  • DEFA 2000 W fan heater
  • Separately-controlled air-conditioning unit in the patient compartment
  • 2 loudspeakers in the patient compartment
  • Oxygen installation
  • Electrical step on the side

Miscellaneous

  • Loading of the baby incubator through side sliding door
  • 230 V power input
  • 230-V power supply while driving guaranteed via inverter
  • 12-V on-board power supply
  • Radio pre-equipment
  • Option to accommodate technical medical equipment in accordance with DIN EN 1789

Base vehicle

ModelMercedes-Benz Sprinter
Type316 CDI 4x2
Engine power120 kW/163 hp
TransmissionAutomatic transmission
FeaturesPneumatic suspension
Air-conditioning unit
Radio link to the patient compartment
AL-KO drop-centre frame
Wheel base3850 mm
Maximum total weight4200 kg
to top