Emergency Ambulance:The WAS 500 Ambulance.

Whether it is the daily use under adverse conditions or be it the use as VIP transporter – this WAS 500 defi nes the standards worldwide by using modern technologies as for example a 360° special warning light, a special super hot country box body construction, an acoustic warning device, a compressor refrigerator, durable and lightweight furniture materials that are resistant to fi re and disinfectants, as well as a comfortable stretcher table. With a max. total weight of 5 to, the compact aerodynamical box ambulance is designed for not protruding the base vehicles width and can pass through heavy traffic and narrow streets as well as a van ambulance.


Here is the data sheet available to download.



  • Sliding door at the right side and compartment door for easy access to emergency bags and medical air compressor
  • Compartment door for easy access to spine board, scoop stretcher, vaccum mattress and carrying chair
  • Two large rear entrance doors, to be opened for 270° for avoiding crashes in heavy traffic situations
  • Compartment door at the rear left side for easy access to the stationary oxygen cylinders
  • Additional under floor compartment for tools, etc.
  • Roof hatch in the ceiling, also for use as emergency exit
  • LED flashers as body flashers, intersection flashers, penetration flashers
  • 360° integrated warning lights from latest LED technology for maximum visibility and fuel saving aerodynamics
  • LED scene lights all around the box body
  • Electric and additional air pressure acoustical warning devices
  • Solar fan functioning when the solar exposure hits the outside fan surface and the AC is off
  • Rear view camera
  • 3 independent AC systems each with an own compressor, for driver’s cab, patient saloon and when the vehicle is shorelined


  • High efficiency LED lighting including blue trauma light
  • WAS SanSafe system: Nebulising system with H2O2, hydrogen peroxide (perfectly safe in the event of Ebola, MERS, SARS, Lasser fever)
  • WAS electro hydraulic table with WAS Multi-Load system:
    - Trendelenburg and anti-Trendelenburg position
    - Adjustable in height
    - Suspension mode
    - CPR mode
    - Lateral movement for an effi cient use of space and an optimum patient treatment
    - Move-in assistance for a smooth and back-friendly loading of the patient
  • Stationary oxygen system with automatic change over
  • Computerized vehicle management on CAN Bus base
  • 230 V sine wave converter
  • IV holder hooks integrated in the ceiling
  • Central touch panel for the control of electro hydraulic table, AC system, warming system and lighting


  • Compartment for emergency bags with access from the outside and the inside
  • 7 ltr compressor refrigerator
  • Doctor’s seat with three point belts, forward and backward movement. Additional 4 point child’s seat belt and ISOFIX child restraint, integrated in the doctor’s seat
  • 5 piece drawer unit
  • 2 slide out trays for small material
  • Hanging locker


  • Storing space for the medical equipment
  • Hanging locker
  • Rotating and foldable seat with three point belt
  • Central control unit
  • Intercom with the driver
  • Oxygen and power (12 V and 230 V) outlets
  • Writing board


  • Rotating and foldable seat with three point belt
  • Tinted window with emergency exit function and venetian blinds for privacy


  • Central supply unit including:
    - Spot light
    - IV hooks
    - Grab rails
    - Oxygen outlet
    - Incubator socket


  • Center console between driver’s and co-driver’s seat
  • Central operation touch panel for all necessary functions
  • Additonal control panel for WAS SanSafe system
  • Rear view screen when operating the reverse gear


  • Electro-hydraulic ambulance table with WAS Multi-Load Assist system
  • WAS SanSafe: stationary nebulising unit providing a perfectly sterile patient compartment (additional vehicle cleaning process)
  • The complete vehicle conversion is made from organic-free materials: no defects in the material, no germ formation
  • With its special material, box body construction and 3 independent air-conditioning units, the vehicle is perfectly adapted to hot countries
  • The panels of the box body can be easily repaired. The complete box body can be exchanged and put onto a new chassis. This increases the life time of an ambulance unit and reduces the costs.
  • Aerodynamic box body in combination with a 6-cylinder-motor and an engine power of 258 hp for perfect manoeuvring in any situation


ModelMercedes-Benz Sprinter
Engine power190 kW / 258 hp
GearboxAutomatic transmission
Wheel base3665 mm
Maximum total weight5000 kg
to top