

WAS 300 Emergency Ambulance
Ford Transit Panel Van 4.3 T
This WAS 300 emergency ambulance sets new standards regarding ergonomics, hygiene, patient handling and data connectivity. This vehicle is equipped with latest state of the art CAN-bus communication technology that covers RFID, telemetry and green features like an eco-run engine control system that reduces idling hours of the base vehicle. A light and friendly interior equipment offers high comfort to the patient. engine. Continuous mobile data connectivity is guaranteed by standalone data transfer systems like 4G and KymetaTM satellite systems. By having a Ford Transit chassis, with a powerful petrol engine and a GVW of 4300 kg, this compact ambulance defines the future for both, paramedics and patients, in the present.
Discover our WAS 300 Emergency Ambulance Ford Transit Panel Van 4.3 T
Choose one of the two images available and discover the outstanding details that make our vehicles so special. Click on the highlighted features for comprehensive information on the innovative technologies and customised solutions incorporated into each vehicle.



LED flashers as body flashers, intersection flashers, penetration flashers as well as in the front light bar for 360° high visibility
LED flashers as body flashers, intersection flashers, penetration flashers as well as in the front light bar for 360° high visibility
Independent AC system for the driver’s cab and for the patient compartment with independent compressors, solar fan functioning when the solar exposure hits the outside fan surface and the AC is off
Continuous mobile data connectivity is guaranteed by standalone data transfer systems like 4G and KymetaTM satellite systems. Warning FM radio system for surrounding traffic while an ambulance is approaching
Large side window, tinted and frosted

- WAS electrohydraulic table
- Trendelenburg and anti-Trendelenburg position
- Adjustable in height
- Suspension mode
- CPR mode
- Lateral movement for an efficient use of space and an optimum patient treatment
- 1x rotating foldable seat with three-point belt, 1x folding attendant’s seat with three-point seatbelt
- Central control touch panel
- Intercom system with the driver
- Three-part overhead compartment
- Space for medical equipment
- Low level storage compartment below the medical equipment
- Rear compartment to store two oxygen cylinders with an automatic change over system
- Compartment for emergency bags with access from the outside and the inside
- Storage space integrated into the bulkhead for a Combi Carrier spine board
- Foldable doctor’s seat with storage space underneath
- High-quality stainless-steel working surface on all compartments
- 7 l compressor refrigerator
- Slide-out tray for small material
- Drugs compartment, lockable, and small overhead compartment
At a glance
BASE VEHICLE
- Model: Ford Transit
- Type: L3H3, 6 cylinder
- Transmission: Automatic transmission
- Wheel Base: 3749 mm
- Maximum total weight: 4300 kg
The concept is transferable to other vehicle types.
The equipment is an example and can be adapted to your requirement.

Special Features
- Electro-hydraulic ambulance table
- The complete vehicle conversion is made of organic-free materials: no defects in the material, no germ formation
- With its special material and 2 independent heavy-duty air-conditioning units, the vehicle is perfectly adapted to hot countries
- Continuous mobile data connectivity is guaranteed by standalone data transfer systems like 4G and KymetaTM satellite systems
- Warning FM radio system for surrounding traffic while an ambulance is approaching
- Computerised vehicle management based on CAN-bus technology
- Central touch panel for the control of the electrohydraulic table, AC system, lighting, fan operation and RFID operation
- Intercom system with the driver
- Foldable doctor’s seat with storage space underneath
- 2 foldable seats with three-point belt
- Storage space integrated into the bulkhead for a Combi Carrier spine board

Further impressions of the vehicle
We are here for you!
Our experienced team is always available to answer your questions about our WAS vehicles. Whether you need advice, customisation or ordering: we will guide you every step of the way and find the ideal solution for your requirements.
Please do not hesitate to contact us – we look forward to helping you!
![Dirk Henke [Translate to English:] Dirk Henke, Geschäftsleitung / Leitung Vertrieb / Service der WAS](/fileadmin/_processed_/b/d/csm_Dirk_Henke_Mitarbeiter_der_WAS_a5f57795bf.webp)
Dirk
Henke
Sales Director WAS Group
![Andreas Plöger [Translate to English:] Andreas Plöger, Geschäftsführer CSO der WAS](/fileadmin/_processed_/c/a/csm_Andreas_Ploeger_WAS-Geschaeftsfuehrer_3ca76ad46e.webp)
Andreas
Plöger
President Overseas
![Christoph Stegemann [Translate to English:] Christoph Stegemann, Vertriebsleiter Deutschland der WAS](/fileadmin/_processed_/e/5/csm_Christoph_Stegemann_Mitarbeiter_der_WAS_7b0a312df9.webp)
Christoph
Stegemann
Sales management Germany
![Florian Degenhardt [Translate to English:] Florian Degenhardt, Vertrieb International, WAS](/fileadmin/_processed_/6/d/csm_Florian_Degenhardt_Mitarbeiter_der_WAS_8c7bf88d88.webp)
Florian
Degenhardt
International sales
![Gunnar Gering [Translate to English:] Gunnar Gering, Vertrieb International, WAS](/fileadmin/_processed_/4/6/csm_Gunnar_Gering_Mitarbeiter_der_WAS_cf19101a9b.webp)
Gunnar
Gering
International sales
![Erno van den Dolder [Translate to English:] Erno van Dolder, Mitarbeiter der WAS](/fileadmin/_processed_/1/3/csm_Erno_van_den_Dolder_Mitarbeiter_WAS_Vertrieb_International_4407001fdf.webp)
Erno
van den Dolder
Sales Europe
![Leopold Ekedi [Translate to English:] Leopold Ekedi, Mitarbeiter der WAS](/fileadmin/_processed_/a/9/csm_Leopold_Ekedi_Mitarbeiter-der-WAS_8ca8974b50.webp)
Leopold
Ekedi
Sales France, Africa
![Anthony Newton [Translate to English:] Anthony Newton, Mitarbeiter der WAS](/fileadmin/_processed_/6/c/csm_Anthony_Newton_Mitarbeiter_der_WAS_ed68c0464f.webp)
Anthony
Newton
Sales Eastern Europe
![Sebastian Hinrichsen [Translate to English:] Sebastian Hinrichsen, Mitarbeiter der WAS](/fileadmin/_processed_/6/8/csm_Sebastian_Hinrichsen_Mitarbeiter_WAS_Vertrieb_Sonderfahrzeuge_93eee29841.webp)
Sebastian
Hinrichsen
Head of Technical Sales/ Sales of official vehicles

Darren
Sullivan
Sales UK

Tom
Howlett
Sales UK
OR USE OUR CONTACT FORM
Thank you for your interest in our products and services. Please complete the form below to send us your enquiry. Our team will contact you as soon as possible to answer your questions and give you any further assistance you may require.

Consultancy-based vehicle design:
Customised vehicles by WAS
As a leading manufacturer of special vehicles and ambulances, we offer customised solutions that are precisely tailored to your needs. Our expertise lies in the complete conversion of vehicles, which we transform into state-of-the-art ambulances or special vehicles.
Whether you need a small or large number of units, we will meet your requirements with the utmost precision and quality. Place your trust in our many years of experience and innovative strength to receive vehicles that exceed your expectations and perform convincingly in use.