Back
Back
Data sheet
WAS 300 Ambulance
Panel Van
3.500 kg
Mercedes-Benz Sprinter
Front view, right side WAS-300 KTW

WAS 300 Ambulance
Mercedes-Benz Sprinter Ambulance 3.5 T

This ambulance impresses with its smooth, easy-to-clean surfaces and a clearly structured interior that optimises space utilisation perfectly. Medical equipment is stored safely and hygienically in cabinets – for maximum order and the highest hygiene standards. The focus is on the patient, while safety and ergonomics for the rescue personnel are guaranteed at all times. Well-thought-out storage solutions in the right places enable efficient work without restricting freedom of movement. The result is a comfortable, functional workplace that makes processes noticeably easier. The Mercedes-Benz Sprinter base vehicle impresses with its robust construction, modern driving comfort and a powerful yet economical drive. Combined with the high-quality WAS interior, the result is a durable ambulance that combines safety, efficiency and comfort at the highest level.

 

Vehicle Overview View Gallery

Discover our WAS 300 Ambulance 3.5 T

Choose one of the two images available and discover the outstanding details that make our vehicles so special. Click on the highlighted features for comprehensive information on the innovative technologies and customised solutions incorporated into each vehicle.

open side view right WAS-300 KTW
Warning system

Integrated warning system in WAS design at the front and rear

Warning system

Integrated warning system in WAS design at the front and rear

Vehicle front
  • Hänsch Sputnik SL LED front flashers
  • Hänsch acoustic warning system integrated into the radiator grille
Work lights

All-round LED work lights

Stretcher system

CPS Stollenwerk stretcher transport system

WAS-300 KTW open rear with ramp
Warning system

Integrated warning system in WAS design at the front and rear

Stretcher system

CPS Stollenwerk stretcher transport system

Storage compartments

Various storage compartments on the left side wall for 10 L oxygen cylinder, backpacks, Accuvac, vacuum mattress, scoop stretcher and other equipment

Partition seat

Partition seat

Carrying chair

Mobile carrying chair with ramp

vacuum mattress compartment

Scoop stretcher holder in the vacuum mattress compartment

Roof storage compartment

Roof storage compartment with LED lighting in the partition wall

When you start the tour, it is loaded from Matterport and data is transferred to Matterport Inc. (USA).

At a Glance

Base vehicle

 

  • Model: Mercedes-Benz Sprinter
  • Engine power: 110 kW / 150 hp, 4x2
  • Transmission: 9-speed automatic transmission
  • Wheelbase: 3665 mm
  • Permissible total weight: 3500 kg

 

The concept is transferable to other vehicle types.
The equipment is an example and can be customised.

WAS-300 KTW left side view

Special Features

  • Integrated warning system in WAS design at the front and rear
  • CPS Stollenwerk stretcher transport system
  • Various storage compartments on the left side wall for 10 L oxygen cylinder, backpacks, Accuvac, vacuum mattress, scoop stretcher and other equipment
  • Mobile carrying chair with ramp
  • Heat exchanger and automatic climate control, controlled via central touch display
  • Air heating with air vent in the internal step housing
  • Scoop stretcher holder in the vacuum mattress compartment
open rear view WAS-300 KTW

Further Impressions of the Vehicle

Front view, right side WAS-300 KTW
open side view right WAS-300 KTW
Rear view WAS-300 KTW
open rear view WAS-300 KTW
WAS-300 KTW open rear with ramp
WAS-300 KTW left side view
WAS-300 KTW right side view
WAS-300 KTW right side view open
Rear view, left side WAS-300 KTW
open rear view WAS-300 KTW
WAS-300 KTW Rear view with ramp
Front view, left WAS-300 KTW
Interior view WAS-300 KTW
WAS-300 KTW Power Load
WAS-300 KTW ambulance table
Interior view of WAS-300 KTW stretcher
Interior shot WAS-300 KTW
WAS-300 KTW interior shot
WAS-300 KTW cabinets, interior
WAS-300 KTW front warning bar
Detailed view of front bar WAS-300 KTW
WAS-300 KTW Rear warning bar
Detailed view of front light bar WAS-300 KTW

We are here for you!

Our experienced team is always available to answer your questions about our WAS vehicles. Whether you need advice, customisation or ordering: we will guide you every step of the way and find the ideal solution for your requirements.

Please do not hesitate to contact us – we are happy to help!

Dirk Henke, Geschäftsleitung / Leitung Vertrieb / Service der WAS

Dirk Henke
Sales Director WAS Group

Christoph Stegemann, Vertriebsleiter Deutschland der WAS

Christoph Stegemann
Sales management Germany

Florian Degenhardt, Vertrieb International, WAS

Florian Degenhardt
International sales

Erno van Dolder, Mitarbeiter der WAS

Erno van den Dolder
Sales Europe

Anthony Newton, Mitarbeiter der WAS

Anthony Newton
Sales Eastern Europe

Sebastian Hinrichsen, Mitarbeiter der WAS

Sebastian Hinrichsen
Head of Technical Sales/ Governmental Sales

OR USE OUR CONTACT FORM

Thank you for your interest in our products and services. Please complete the form below to send us your enquiry. Our team will contact you as soon as possible to answer your questions and give you any further assistance you may require.

* Mandatory Field

Consultancy-based vehicle design:
Customised vehicles by WAS

As a leading manufacturer of special vehicles and ambulances, we offer customised solutions that are precisely tailored to your needs. Our expertise lies in the complete conversion of vehicles, which we transform into state-of-the-art ambulances or special vehicles.

Whether you need a small or large number of units, we will meet your requirements with the utmost precision and quality. Place your trust in our many years of experience and innovative strength to receive vehicles that exceed your expectations and perform convincingly in use.

 

find out more